Parental Lock
Sets an age restriction for programmes. Any programme that exceeds the age restriction can only
be watched after a PIN Code is entered correctly.
~
• For cable operators in Netherlands, the PIN code should be entered when the programme rating is above or
equal to the age you specify.
1 Press the number buttons to enter your existing PIN code.
If you have not previously set a PIN, a PIN code entry screen appears. Follow the instructions of "PIN
Code" below.
F
f
2 Press
/
to select the age restriction or "None" (for unrestricted watching), then press
3 Press
RETURN.
z
• PIN code 9999 is always accepted.
z
• It is recommended that you set "Auto Service Update" to "On", so as to allow new
digital services to be added automatically as they become available. If set to "Off",
new digital services will be notified by an on-screen message and the services will
not be automatically added. The availability of this function depends on your
region/country. If unavailable, perform "Digital Auto Tuning" to add new services.
• "Software Update": This TV set is capable of receiving software
upgrades via the broadcast signal. In order to receive upgrades the
System Update option in the Technical Set-up menu should be set to
"On". When an upgrade is detected the user will be informed by a series
of on screen displays on how to proceed with the upgrade. Please do not
disconnect the set from the mains during the installation procedure.
• "System Information": Displays the current software version and the
signal level.
• "Time Zone": Allows you to manually select the time zone you are in, if it
is not the same as the default time zone setting for your country/region.
~
• When "Cable" is selected this function may not be available in some countries.
• "Auto DST": Sets whether or not to automatically switch between summer
time and winter time.
• "On": Automatically switches between summer time and winter time according
to the calendar.
• "Off": The time is displayed according to the time difference set by "Time
Zone".
~
• When "Cable" is selected this function may not be available in some countries.
• "Service Replacement": Select "On" to automatically change the
channel when broadcaster changes transmission of the viewing
programme to a different channel.
"CA Module Set-up"
Allows you to access a pay TV service once you obtain a Conditional Access Module
(CAM) and a view card. See page 21 for the location of the
(PCMCIA) socket.
.
37
GB