Tuning In By Entering The Frequency (Direct Tune) - Denon AVR-S700W Owner's Manual

Contents Connections
o Operations accessible through the option
menu
"Tuning in by entering the frequency (Direct Tune)" (v p. 69)
0
"Changing the tune mode (Tune Mode)" (v p. 70)
0
"Tuning in to stations and presetting them automatically (Auto
0
Preset)" (v p. 70)
"Presetting the current broadcast station (Preset
0
Memory)" (v p. 71)
"Specify a name for the preset broadcast station (Preset
0
Name)" (v p. 72)
"Skipping preset broadcast stations (Preset Skip)" (v p. 73)
0
"Adjusting the volume of each channel to match the input source (Ch
0
Level Adjust)" (v p. 107)
"Adjusting the tone (Tone Control)" (v p. 108)
0
"Displaying your desired video during audio playback (Video
0
Select)" (v p. 109)
"Playing the same music in all zones (All Zone Stereo)" (v p. 110)
0
Front panel Display
Playback Settings
Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION when the input source is "Tuner".
The option menu screen is displayed.
2
Use ui to select "Direct Tune", then press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use ui to select the number, then press p.
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
Rear panel 69
Tips
If o is pressed, the immediately preceding input is cancelled.
0
Remote Index
Appendix