Contents
Connections
TV Format
Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
PAL:
"Format" can also be set by the following procedure. However, the menu screen
is not displayed. Following the display content to make the setting.
1. Press and hold the main unit's TUNER PRESET CH + and TUNE + for at least
3 seconds.
"V.Format:<NTSC>" appears on the display.
2. Use the main unit's TUNER PRESET CH + or TUNER PRESET CH - and set
the video signal format.
3. Press the main unit's STATUS to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture
will not be displayed properly.
Front panel
Display
Playback
Select NTSC output.
Select PAL output.
Rear panel
Settings
152
Remote
Tips
Appendix
Index