Remote And System Operations; Passive Locking; Auto Re-Locking - Python 4106P Owner's Manual

Remote and System Operations

Passive Locking*

Park and exit the vehicle, after the doors are closed the Passive lock-
ing countdown begins. The led flashes quickly and upon reaching
20 seconds the siren then chirps once. At 30 seconds the system
activates itself.
Anytime before the system locks you can re-enter the vehicle or
open the trunk to load or unload items and, after closing passive lock-
ing resumes.
To stay secure in case of accidental unlocking the system, if a
door is not opened within 30 seconds the system reactivates itself and
locks the doors.

Auto Re-locking*

Auto re- ensures the vehicle stays locked if it is not entered after unlock-
ing by remote control. After unlocking by remote, the system automati-
cally re-locks the doors (if programmed on) in 30 seconds. Open any
point of entry to stop the re-lock until the next unlock by remote.
Onetime Bypass*
Turn the ignition On for one to three seconds and then Off. The horn
honks once to confirm one-time bypass is enabled.
One-time bypass can be used to temporarily bypass the Passive lock-
ing operation for one cycle. It also bypasses the comfort closure and
auxiliary channel outputs if programmed to activate when locking.
After the next unlock, all operations return to normal.
* The optional horn honk feature must be installed.
© 2012 Directed. All rights reserved.
23