How to Watch Both Analog and Digital Broadcasts with a Single Antenna
You can watch both analog and digital broadcasts by connecting a single antenna.
Connection Method
Make sure that the antenna cable is connected to ANT 1 (ATV/DTV).
- Antenna or Cable service without a cable box connections
- For optimum picture quality, adjust antenna direction if need,
- When inserting a 75
- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
How to Watch
Turn on TV to activate Auto Channel
1
Press
INPUT on remote control.
2
3
Press
to move to Analog TV or Digital TV and press
4
Press
button or
Ex.) When you want to watch cable channel number 120, press
the digit buttons.
While watching digital broadcast, you can switch a digital signal to an analog signal by pressing the
17
ohm coaxial cable into the input connection, ensure the wire tip not to bend.
(See page 47)
to memorize the available channels.
button to select the desired channels.
VHF Antenna
UHF Antenna
to select.
+
+
button.