Unify System Overview; Using The Unitfy Menu - Bose LIFESTYLE 135 series II Setup Manual

Changing Your System Setup
UNIFY® system overview
The UNIFY intelligent integration system guides you through the initial process of
setting up and configuring your system. It helps you choose the right cables and
inputs, and program the LIFESTYLE® remote to operate your connected devices.
After completing the initial setup, you can use the UNIFY system at any time to
change your system setup and configuration.
Using the UNIFY menu
To display the UNIFY menu on your TV, press the Setup button on the front of the
control console. Using the navigation buttons on the remote, select the function
you want and follow the instructions on the screen.
Resume initial
setup
If your initial setup is incomplete, you can return to the UNIFY setup
process at the last completed event.
Restart initial setup If your initial setup is incomplete, you can start the UNIFY setup
process from the beginning.
Reconnect
Acoustimass®
(135 series II
systems only)
Language
ADAPTiQ®
TV setup
Source setup
Add a new device
Update
Teach mode
Exit UNIFY
26- English
Follow the onscreen instructions to reconnect the speaker array with
the Acoustimass module.
Change the language of the onscreen display.
Start the ADAPTiQ audio calibration process. After ADAPTiQ has been
run, this menu item allows you to disable or enable ADAPTiQ.
After your TV is connected to the console, you can:
• Program the LIFESTYLE® remote to control your TV
• Manually enter remote control IR device codes
• Replace your TV
• Add, change, or remove the TV audio connection
For sources connected to Input 1-5 of the control console, you can:
• Change the name of the device
• Program your remote to control the device and add theIR emitter
• Manually enter remote control IR device codes
• Remove the device
• Add or change the type of audio or video connection
After your initial setup is complete, you can add another device or
accessory to your system.
Used to perform a system software update (see "Performing a system
software update" on page 30 for more information).
This item is used to send IR codes to program a learning remote.
Closes the UNIFY menu and returns you to the last source selected.