Operating Your System Sources; Selecting A Source - Bose LIFESTYLE 135 series II Setup Manual

Operating Your System Sources
Selecting a source
The SOURCE menu allows you to select your sources and connected devices.
The menu can display a maximum of 1 0 selections. When there are more than 1 0
selections, an arrow appears either at the top or bottom of the menu telling you to
scroll up or down to see the other items.
1. Press the SOURCE button on the remote to display the list of connected
devices on your TV.
Indicates more selections
above. Move highlight up.
Indicates more selections
below. Move highlight down.
2. Keep pressing SOURCE to move the highlight down the list and select the
source you want.
• You can also use the up
A
or down
T
navigation buttons to select
a source.
• If you named a device during the setup process, the assigned name appears
in the list. Unnamed devices appear as generic inputs such as "Input 1
(HDMI)" and "Input 2 (HDMI)."
• If you select a source that is turned off, a message appears on the screen
reminding you to turn on the source.
Note: When listening to audio sources, the system automatically enters Screensaver
mode to prevent the risk of screen burn-in. Press any button on the LIFESTYLE
remote to restore the picture. To disable the screensaver, see "Changing
System Options" on page 23.
Note: The UNIFY® intelligent integration system sets up your LIFESTYLE® remote to
control each of your devices. If one or more of these devices does not respond
to the LIFESTYLE® remote, see "Troubleshooting" on page 27.
16- English