Safety & Shop Practices; Routine Maintenance - Tanaka MOBY XL Service Manual

The most successful and profitable service shops consistently seem to maintain the best habits of safety,
o
cleanliness, and orderly procedure. The following information is intended as a guide towards developing habits
that are necessary to accomplish satisfactory service work.
Maintain a clean and orderly work area that is well lighted and adequately ventilated.
o
Tools, instruments, and parts needed for work should be clean and readily available before any job is started.
o
(Special tools available for servicing TANAKA equipment are listed in this manual.)
Scooter should be cleaned before repair work starts. Cleaning will often help reveal a source of trouble.
o
Before attempting to repair or operate any equipment, read and understand all information provided by the
o
instruction manual for the equipment.
Never attempt to service a unit that is running or still heated from running unless it is specifically required by the
o
manufacturer's instructions.
Wipe-up all spilled liquids immediately. Use non-flammable solvents for cleaning. Clean all parts before
o
reconditioning or reassembling.
Thoroughly inspect all parts for wear or damage. Replace all parts that show damage or excessive wear.
o
Always recondition and /or repair equipment strictly according to the Manufacturer's specifications.
o
Be sure all shields and safety devices are correctly installed before performing any final operating tests.
o
After completion of any service or repair, the equipment should be thoroughly cleaned.
o
Air Filter
All Fasteners
Cooling Fins
Spark Arrestor
Fuel Filter
Spark Plug
Muffler & Exhaust Ports Clean
All Fasteners
Drive Belts
Brake (front)
Steering Head Inspect/Adjust
www.tanaka-usa.com
Moby XL, SE-803
Safety & Shop Practices
Routine Maintenance Guide
Each Use 20 Hrs. 25 Hrs. 100 Hrs.
Clean
Tighten
Clean
Clean
Clean
Clean
Tighten
Inspect/Adjust
Inspect/Adjust
4
Service Manual
O
O
O
O
O
O
Daily Weekly Monthly
O
O
O
O
O
custsvc@tanaka-ism.com