Installation; System Recommendation; Windows Pc; Other Systems - Cantatis Ultimate Audio Overture 192 User Manual

High performance 24-bit 192khz audio output interface
Hide thumbs Also See for Overture 192:
Table of Contents

Advertisement

Cantatis
E. Electrical S/PDIF Connector
Digital S/PDIF audio is also provided via this RCA connector for connection to a digital
amplifier or AV system. Cables are available from our website (www.cantatis.com).
F. PCI Connector
The PCI connector is the interface that the Overture 192 uses to communicate with your
computer. This must be plugged into a suitable free PCI slot inside your computer (see
section 2.2 below).
G. Expansion Ports
The three expansion ports are provided for connection to other Cantatis products. Please
visit our website (www.cantatis.com) for information about new products and offers.

2 Installation

2.1 System Recommendation

2.1.1 Windows PC

It is recommended that your Windows PC has at least the following specification although there
are no restrictions during the installation process.
• Intel Pentium III, AMD or compatible CPU
• At least 256Mbytes of RAM
• One available PCI slot
• CDROM drive
• Microsoft Windows® 98SE, 2000, XP or Vista
Note that there is a separate Windows Vista User Guide to make installation and use
straightforward for Windows Vista users. If you are using Windows Vista then please see
the Cantatis Overture 192 Windows Vista User Guide.

2.1.2 Other Systems

Check the Cantatis website (www.cantatis.com) for updates on how to use your Overture 192 on
systems that are not running Microsoft Windows.

2.2 Hardware Installation

The following instructions describe a typical installation in a standard personal computer. Your
experience of installing the Overture 192 might vary slightly from these instructions but the
general process should be the same.
© Cantatis, 2009
Overture 192 Windows XP User Guide
Page 5 of 26

Advertisement

Table of Contents
loading

Table of Contents