Table of Contents
Advertisement
Cantatis
Sample rate
Levels
Control
Help
These panels are selected by moving your mouse pointer over the panel name so that the name
turns from white to gold and then clicking with your left mouse button.
The selected panel will then be displayed.
3.5.1 Sample Rate Panel
The "Sample rate" panel allows you to control the audio playback sample rate used by the
Overture 192 Audio Output Interface:
The panel shows the "Current sample rate" that the Overture 192 is playing at (if there is nothing
playing then this will show the sample rate that was last played).
It also shows the "Selected sample rate". This is set to "Auto" by default, which means that the
Overture 192 will automatically play at the same sample rate as the music or audio clip that is
played. For example, this means that CDs (which are recorded at 44.1kHz sample rate) that are
ripped to your PC will play at 44.1kHz and equally, very high quality downloaded music files
recorded at 192kHz will play at 192kHz without you having to change any settings.
If you are using the analogue RCA outputs of the Overture 192 and you are not using the digital
S/PDIF outputs then you can leave this set to "Auto" so that you play exactly what was recorded.
© Cantatis, 2009
Allows you to control the audio playback sample rate.
Allows you to view and test the audio levels.
Allows you to control Overture 192 features.
Provides application version and access to help information.
Overture 192 Windows XP User Guide
Page 18 of 26
Advertisement
Table of Contents
