Text/Character Entry; Selecting Sources; Settings Menu - NAD C 446 Owner's Manual

TEXT/CHARACTER ENTRY

When entering a text or character as required by a menu item, the
following buttons can be used.
Enter Password
_
{Source} = Next/Prev
{Scroll} = Edit Char
FRONT PANEL BUTTONS OR KNOB
CONTROL/ENTER: Rotate to select alphanumeric characters for text/
character entry.
CONTROL/ENTER: Press to end and complete text/character entry.
4
[SOURCE ]: Press to select text/character and move on to the next
text/character entry.
3
[ SOURCE]: Press to go back to previous text/character.
TNR 2 REMOTE CONTROL BUTTONS
D F
[ / ]: Toggle to select alphanumeric characters for text/character entry.
ENTER: Press to end and complete text/character entry.
S
[ ]: Press to select text/character and move on to the next text/
character entry.
A
[ ]: Press to go back to previous text/character.
IMPORTANT NOTE ABOUT PASSWORD/USER NAME ENTRY
Right after entering the last character of your password or user name, press
[ENTER] button immediately to complete password or user name entry.

SELECTING SOURCES

Toggle TNR 2 or front panel's [3 SOURCE 4] buttons to step through the
following Source modes. Stop (release button) when your desired Source
comes up.
Internet Radio $ UPnP Client $ UPnP Receiver $ Last.fm $ USB $ iPod
$ AM $ FM $ DAB (230V version model only) $ then back to Internet
Radio

SETTINGS MENU

At any source mode, [SETUP] button can be pressed to bring up the
"Settings Menu". Aside from Network Setup, DAB Setup and Last.FM Setup
which are discussed separately in their respective associated source modes,
the "Settings Menu" also features the following
· Display Brightness
·
Digital Level
·
System Info
DISPLAY BRIGHTNESS
Settings Menu
}Display Brightness
Digital Level
System Info
Display Brightness
}~Bright
`Dimmed
Select "Dimmed" to reduce brightness of the display or "Bright" for normal
display brightness.
DIGITAL LEVEL (APPLICABLE ONLY AT INTERNET RADIO MODE)
Settings Menu
Display Brightness
}Digital Level
System Info
Digital Level
}~ 0dB
` -3dB
` -6dB
Select "Digital Level" to attenuate output level by -3dB or -6dB. The default
level is 0dB.
SYSTEM INFO
Settings Menu
Display Brightness
Digital Level
}System Info
Select to display current C446 system information.
SETUP
SETTING UP THE C 446
11