Trane ComfortLink II XL950 Control User Manual page 7

3) Air Cleaner Mode
Automatic means the air cleaner will run when the fan runs.
Quick Clean is a full power air cleaning cycle that increases the system fan speed setting (when not
actively heating or cooling) to 100% for three hours to achieve maximum clean air delivery rate.
Allergy Clean is a full power air cleaning cycle that increases the system fan speed setting (when not
actively heating or cooling) to 100% for 24 hours to achieve maximum clean air delivery rate.
Selecting "Ventilation" allows the user to temporarily override the programmed run-time.
3
Setpoint Panel
A Setpoint is the desired temperature you would like your home heated or cooled to when in one of the three System Modes.
Raise
Lower
Heating Setpoint Panel
To adjust the
Heating Setpoint,
select "Heating"
and raise or lower
the temperature to
reach your desired
setpoint.
Cooling Setpoint Panel
To adjust the
Cooling Setpoint,
select "Cooling"
and raise or lower
the temperature to
reach your desired
setpoint.
7