Using Other Functions
Step by Step
38
•
Do not disturb, code:
•
Speed-dialing, code:
•
Associated service, code:
Precondition: You have a telephone that uses tone
dialing (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
o
Set up a call to the system. Enter the station number
(contact the service personnel).
o
Wait for a continuous tone (if necessary switch the tele-
phone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
Enter the code (necessary only if programmed in the
system).
o
Wait for a dial tone and then enter the code, such as
97 for Do not disturb on. Make other inputs as
*
necessary; (refer to the operating instructions for pulse
and DTMF telephones).
or
o
Dial the external number.
You can only execute one function at a time, or
set up only one outgoing connection.
The connection is immediately released after
successful activation of a function.
In the case of an external-external call, the
connection is released as soon as either of the
parties ends the call.
97/#97
Page 12
*
7
Page 22
*
83
Page 36
*