Add Wps Network - Zte N861 User Manual

Add WPS Network

Wi-Fi Protected Setup (WPS) is a feature that makes it easy to
add your phone to the access points which supply WPS.
You can use the following method to connect your phone to a
wireless network using WPS.
1. Touch the Home Key > Menu Key > System settings >
Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch WPS button connection.
4. Press the WPS button on the wireless router and the
access point will recognize your phone and add it to the
network.
NOTE: After you touch WPS button connection, your phone
gives you two minutes to press the WPS button on the wireless
router.
Adjust Advanced Wi-Fi Settings
1. Touch the Home Key > Menu Key > System settings >
Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Menu Key > Advanced to adjust the following
settings.
Network notification: Get notifications in the status bar
when Wi-Fi is on and an open network is available.
Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi
on in sleep mode.
47