Honda SILVER WING FSC600D 2007 Owner's Manual page 125

Engine Oil, Filter & Strainer Screen
7. Apply a thin coat of engine oil to the
rubber seal ( ) of a new oil filter. 7
(7)
(7) rubber seal
8. Install the new oil filter and tighten it by
hand.
9. Using an oil filter wrench attachment
and a torque wrench, tighten the new oil
filter to the specified torque:
19 lbf·ft (26 N·m , 2.7 kgf·m)
116
Servicing Your Honda
10. Clean the oil strainer screen.
11. Check the oil strainer screen, sealing
rubber, and oil plug O-ring are in good
condition.
12. Install the oil strainer screen, spring,
and oil plug. Tighten the oil plug to the
specified torque:
11 lbf·ft (15 N·m , 1.5 kgf·m)
13. Fill the crankcase with the
recommended oil (page
approximately:
2.3 US qt (2.2 )
14. Install the oil filler cap/dipstick securely.
109 ),