Creating A Party Atmosphere (Dj Effect); Other Operations; Using The Party Chain Function - Sony LBT-GPX555 Operating Instructions Manual

Creating a party
atmosphere
(DJ EFFECT)
1
Press the following button to
select the effect type.
The selected button lights up and the
effect is activated.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocals.
• PAN: Create a feeling that the sound
is moving around the speakers
between left and right channels.
• WAH: Create a special effect of
"Wah-wah" sound by moving the
frequency of a filter up and down
automatically.
2
Press DJ CONTROL +/– to adjust
the effect level.
To turn off the effect
Press the selected effect button again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function or tuner band.
• If you activate the DJ EFFECT during
transfer, the sound effect will not be
transferred to the USB device.
• You cannot use VOLUME/DJ CONTROL
on the unit to adjust the volume when the DJ
EFFECT is activated. Press VOLUME +/– on
the remote control to adjust the volume.
GB
30

Other Operations

Using the Party Chain
function
You can connect multiple audio systems
in a chain to create a more interesting
party environment and to produce higher
sound output.
Activate a system in the chain to be the
"Party Host" and share the music. Other
systems will become "Party Guest" and
play the same music as the "Party Host".
Setting up the Party Chain
You can set up a Party Chain by
connecting all the systems using audio
cords (not supplied).
Before connecting cords, be sure to
disconnect the power cord.