Yamaha HTR-5635 Owner's Manual page 28

BASIC PLAYBACK
4
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.
5
Adjust the volume to the desired level.
The volume level is displayed digitally.
Example: –70.0 dB
Control range: VOLUME MUTE (minimum) to
0 dB (maximum)
The volume level indicator also shows the current
volume level as a bar graph.
If desired, use BASS and TREBLE. These controls
only effect the sound from the main speakers.
VOLUME
BASS TREBLE
+ +
– –
Front panel
Notes
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the main left
and right speakers.
• If you have connected a recording component to the VCR
OUT, or MD/CD-R OUT jacks, and you notice distortion or
low volume during playback of other components, try turning
the recording component on.
6
Select a DSP program if desired.
Use PROGRAM l / h (DSP program buttons on
the remote control) to select a DSP program. See
pages 29 to 33 for details about DSP programs.
PROGRAM
or
Front panel
24
+
VOLUME
or
–
Remote control
HALL JAZZ ROCK ENTERTAINMENT
1 2 3 4
TV SPORTS MONO MOVIE 1 - MOVIE THTR - 2
5 6 7 8
/DTS - SELECT MATRIX 6.1 STEREO
9 0 +10 ENTER
Remote control
I BGV (background video) function
The BGV function allows you to enjoy video images
from a video source together with sounds from an audio
source. For example, you can enjoy listening to classical
music while having beautiful scenery from a video source
on the video monitor.
Select a source from the video group, then select a source
from the audio group using the input selector buttons on
the remote control. BGV selections cannot be made with
INPUT l / h on the front panel.
CD MD/CD-R
DVD D-TV/CBL
I To mute the sound
Press MUTE on the
remote control.
To resume the audio output,
press MUTE again.
y
• You can also cancel mute by pressing VOLUME +/–, etc.
• During muting, the "MUTE" indicator flashes on the front
panel display.
I When you have finished using
this unit
Press STANDBY/ON (STANDBY on the
remote control) to set this unit in the
standby mode.
STANDBY
/ON
Front panel
TUNER SLEEP
VCR V-AUX
MUTE
STANDBY
or
Remote control