Connecting An External Decoder; Connecting The Power Supply Cords - Yamaha HTR-5635 Owner's Manual

CONNECTIONS

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN
left and right, CENTER, SURROUND left and right and
SUBWOOFER) for discrete multi-channel input from an
external decoder, sound processor, or pre-amplifier.
Connect the output jacks on your external decoder to the
6CH INPUT jacks. Be sure to match the left and right
outputs to the left and right input jacks for the main and
surround channels.
Notes
• When you select 6CH INPUT as the input source, this unit
automatically turns off the digital sound field processor, and
you cannot listen to DSP programs.
• When you select 6CH INPUT as the input source, settings of
"1 SPEAKER SET" on the SET MENU do not apply (except
for "1E MAIN Lv").
18
Connecting the power supply
cords
I Connecting the AC power cord
Plug in this unit to the wall outlet.
I AC OUTLETS (SWITCHED)
U.S.A. and Canada models ............................ 2 OUTLETS
Use these outlets to connect the power cords from your
components to this unit. The power to the AC OUTLETS
is controlled by this unit's STANDBY/ON (or SYSTEM
POWER). These outlets will supply power to any source
component connected to this unit whenever this unit is
turned on. The maximum power (total power
consumption of components) that can be connected to the
AC OUTLETS varies depending on the area which it was
purchasing is 100 W.
AC OUTLETS
SWITCHED
120V 60Hz
0.8A MAX. TOTAL
100W MAX. TOTAL