Specifications
Built-In Dishwasher
Overall Width
Overall Height from Floor
33-7/8 (86.0 cm) min. to 35-7/8" (91.1 cm) max.
Overall Depth from Rear
without door panel – 21 5/8" (54.9 cm)
with door panel – 22 3/16" (156.4 cm)
Cutout Width
Cutout Height
34" (86.4 cm) min. to 36" (91.4 cm) max.
Cutout Depth
Electrical Requirements
12.0 amps, 120V/60 Hz; 4' (1.2 m) electrical cord
Water-Heating Element Rating
Inlet Water Temperature
Inlet Water Pressure
Operating Range
Inlet Water Hose
Minimum 3/8" OD copper tubing or braided metal water line required.
Drain Hose
6.4' (1.9 m) drain hose provided
Drain Hose High Loop Required
Height from floor – 28" (71.1 cm)
Approximate Shipping Weight
NOTICE
Because we continually strive to improve our products, we may change our specifications
and design without prior notice. This device corresponds to the following directives: UL
749 Household Dishwasher Directive.
9
23-9/16" (59.8 cm)
24" (61.0 cm)
24" (61.0 cm)
supplied with unit
1240 watts
120°F (49°C) required
4.35 to 145 psi (.3 - 10 bar)
97 lbs. (44 kg)
Enclosure Preparation
Electrical Preparation
WARNING
The dishwasher is designed for an electrical supply of 120V, 60Hz, AC, connected to a
dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated for
15 amperes.
Preparation for Installing Mounting Brackets
• Place the two mounting brackets into the
top corners of the dishwasher.
• Fix the mounting brackets (A) to the top
corners of the dishwasher, with the screws
supplied.
• Bend sides of mounting brackets (B) in
order to fix from sides (if necessary).
Adjusting Height
If the height of the enclosure is 33-7/8" to
35-7/8" (86.1cm-91.1cm), adjust supports as
shown in the figure.
10
WARNING
Dishwasher must be secured to
adjacent cabinetry using the mounting
brackets provided. Failure to do this
may cause damage to property or
bodily injury.
Supplied (4)