Canon MV300 Instruction Manual page 49

Setting the program AE mode
1. Set the camera to record pause mode.
2. Slide the program selector to Q (program AE) mode.
3. Push the selector dial in to display the program menu.
4. Turn the selector dial to move the arrow up or down the display.
5. Push the selector dial in to select the desired program.
• The program will appear in the display.
6. Press the start/stop button to begin recording.
• The name of your selected recording program appears constantly on the left of
the display, with the exception of Auto, which is displayed and then disappears
after 4 seconds.
• Avoid changing programs during recording as the brightness of the image may
change suddenly.
• The specialised AE programs are not suitable for all kinds of lighting. The
image may flicker, or a bright line may appear on the screen if you use them in
the wrong lighting conditions.
• If you switch the camera from the [ program to the
returns to the Auto mode.
Q
program, the camera
E
49