Setting The Time; Check Control - BMW 323i Owner's Manual

Clock

Setting the time

To set the 12h/24h mode, refer to Formats and
units of measure on page 67.
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the time and the word "SET".
2. Press button 2.
3. Use button 1 to set the hours.
4. Press button 2 to confirm the entry.
5. Use button 1 to set the minutes.
6. Press button 2 to confirm the entry.
7. Press button 2.
The system accepts the new time.
Date
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 18.
Setting the date
To set the dd/mm or mm/dd date format, refer
to Formats and units of measure on page 67.
Online Edition for Part no. 01 41 2 604 250 - © 02/10 BMW AG
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the date and the word "SET".
Press button 2.
2.
3. Use button 1 to set the day of the month.
Press button 2 to confirm the entry.
4.
5. Set the month and the year in the same way.
6. Press button 2.
The system stores the new date.

Check Control

The concept
The Check Control monitors vehicle functions
and alerts you to any malfunctions in the sys-
tems monitored. This type of Check Control
message includes indicator and warning lamps
in the instrument cluster and, in some cases,
an acoustic signal.
Indicator and warning lamps can light up in
a variety of combinations and colors.
Several of the lamps are checked for proper
functioning and light up temporarily when the
engine is started or the ignition is switched on.
69