Turn Signals; Headlamp Flasher - BMW 323i Owner's Manual

Turn signals/

headlamp flasher

1 High beams
2
Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal indicator
has failed.<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
52
Online Edition for Part no. 01 41 2 604 250 - © 02/10 BMW AG
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol
appears in the display.
5. Press button 2.
6. Use button 1 to select:
>
Turn signals flash once.
>
Triple turn signal.
7. Press button 2.
The setting is stored for the remote control
currently in use.