Changing Secure Shell Key Pairs - Nokia Voyager Reference Manual

Note
If you have previously configured authorized keys for user accounts, you
will see the information in the View/Delete Per-User Authorized Keys
table. You can delete the authorized key for each user by clicking in the
D
ELETE
permanent.
4. Select the user name from the U
5. If you are adding an RSA authorized key to be used in SSHv1, enter the
6. Click A
7. Click S

Changing Secure Shell Key Pairs

The following procedure describes how to generate new RSA and DSA keys.
When you generate new keys, you may need to change configurations of each
Voyager Reference Guide
A
box. Click
PPLY
key size, exponent, modulus, and an optional comment in the Add a New
Authorized Key (RSA, for protocol version 1) table.
Or
If you are adding a RSA authorized key to be used in SSHv2, enter the
RSA key, in either OpenSSH format or SSHv2 format, depending on your
client, and optional comment in the (RSA, for protocol version 2) table.
Or
If you are adding a DSA authorized key to be used in SSHv2, enter the
DSA key, in either OpenSSH format or SSHv2 format, depending on your
client, and optional comment in the Add a New Authorized Key (DSA, for
protocol version 2) table.
.
PPLY
to make your changes permanent.
AVE
S
and then to make your changes
AVE
SERNAME
drop-down list.
551