Table of Contents
Advertisement
How to Properly Use the Infant
Cruizer
1. TO OPeN INfANT CRuIzeR
Step 1. Push Button on top of handle (picture A) and
extend handle slightly to remove locking disks from the
docking area.
Step 2. Pull handle up and back until it goes behind the
"spring latch" shown in Picture B.
2. TO OPeRATe BRAKe SySTeM
WARNING
!
ReAR BRAKe WheN INfANT CRuIzeR IS PARKeD,
eveN ON flAT SuRfACeS.
WARNING
!
AlWAyS eNGAGe fRONT AND ReAR BRAKeS AND
POINT INfANT CRuIzeR fACING "DOWNhIll."
THE INFANT CRUIzER HAS MORE BRAKING POWER
IN THE FORWARD DIRECTION THAN THE REAR
DIRECTION.
TO lOCK fRONT TOe BRAKeS:
Pull Infant Cruizer backwards a little bit to expose caster
brake pedals in the front of the Infant Cruizer and step on
brake pedals until they remain in the locked position as
shown in Picture C.
TO lOCK ReAR BRAKe:
Push brake pedal down at any location with your foot until
it locks in place, as shown in Picture D.
TO uNlOCK fRONT TOe BRAKeS:
Release the front brakes by pulling up the brake pedals
with your hand.
TO uNlOCK The ReAR BRAKe:
Release the rear brake by pushing up on the brake pedal
with your toe.
12
: AlWAyS uSe The
: If PARKeD ON A hIll,
Picture A
Picture B
Picture D
HOW TO PROPERLY USE THE INFANT CRUIZER
Locking
Discs
Spring
Latch
Picture C
Front Toe
Brakes
Advertisement
Table of Contents
