Replacing Agitator Brushes - Hoover FloorMate PowerBrush 300 Instructions Manual

29
F
E
A
30
Replacing the agitator brushes
Should the agitator brushes on your FloorMate™ PowerBrush 300 cleaner become worn and need to
be replaced, they can be replaced at your nearest HOOVER Sales and Service Center.
14
To replace nozzle, make sure latches (A) are out.
29
Cleaner should be in the upright position for easier assem-
bly of the nozzle.
Align middle section (E) of nozzle with opening (F) on cleaner.
A
While holding nozzle in place, slide latches inward to lock
30
in place.