Av/Hdmi/Usb - QFX TV-LED1312D Instruction Manual

6.21 Cable System
This item is used to select preferred cable system.
Available options: AUTO, STD, IRC, HRC.
NOTE: This item is adjustable only when your signal type is set to Cable.
6.22 Start to Scan
- Press RIGHT or ENTER button to start auto scanning.
- Press MENU or EXIT button to exit auto channel searching.
6.3 Favorite
- Press RIGHT or ENTER button to enter it.
- Press UP or DOWN navigation button to select preferred channel.
- Press ENTER button to label the selected channel as a favorite one or not.
6.4 Show/Hide
- Press RIGHT or ENTER button to enter it.
- Press UP or DOWN navigation button to select preferred channel.
- Press ENTER button to show or hide the selected channel.
6.5 Channel No.
- Press LEFT or RIGHT navigation button to select preferred channel number.
6.6 Channel Label
- Press RIGHT or ENTER button to enter it.
- Press LEFT or RIGHT navigation button to move the cursor.
- Press UP or DOWN navigation button to adjust the value.
NOTE: If no available channel is present, Favorite, Show/Hide, Channel No., and Channel
Label will not be adjustable.
6.7 DTV Signal
This item is not user adjustable.

AV/HDMI/USB

- Press SOURCE button on unit top or remote control to select preferred input source.
- For menu operations in above modes, please refer to the menu operations in TV mode.
36