Audio Setup - QFX TV-LED1312D Instruction Manual

18. Initial settings
Once the initial programming is entered it is retained in memory until changed, the player
can always be operated under the same conditions.
Common procedure for initial settings
●
Press SETUP button on remote control.
● Use the navigation buttons to select preferred item, and press ENTER button, each
screen for setting the value is displayed. Then move the navigation buttons to set the item
and press ENTER button to confirm the settings.
●
Press SETUP button to close setup menu.
●
Use LEFT or RIGHT navigation button to switch to another main setup item. Then press
RIGHT navigation button or ENTER button to enter submenu page; press LEFT navigation button
to return to previous menu page.
1. GENERAL SETUP
1.1 TV DISPLAY - It is for selecting TV output mode.
Options: NORMAL /PS: Pan & scan mode
NORMAL/ LB: Letter box mode
WIDE: 16:9 wide screen mode
1.2 ANGLE MARK - It is used to select whether or not the
multi- angle icon is display on screen when a Multi-angle
disc is playing.
Options: ON: Icon will be displayed
OFF: Icon will be turned off
1.3 OSD LANG - It is used to choose the desired language for different user. In this player,
you can choose English or other languages.
1.4 CAPTIONS - It is used to switch the caption ON/OFF when playing disc.
1.5 SCREEN SAVER - When the player is not in use for 5 minutes, screen saver will
display on the screen.
Options: ON: Screen saver is enabled
OFF: Screen saver is disabled
1.6 DEFAULT - It is used to reset to factory settings.

2. AUDIO SETUP

SPEAKER SETUP - It is used to set the speaker output
levels.
Options: LT/RT-Left/Right mix mode
STEREO - Select this option if you don't have a 2.1
channel amplifier.
22