Denon S-102 Owner's Manual page 42

ENGLISH
[DVD]
I
~.",
Sy,mptom
Countenneasure Page
Playback does • Is there condensation on the disc or player? (Let stand for 1 or 2 -
not start when
~
hours)
button is pressed.
• Discs other than DVDs and music CDs cannot be played.
4
Playback stops • Disc is dirty. Wipe off the dirt. 5
immediately.
Picture is
• Some disturbance is normal.
-
disturbed during
the search
operation.
Buttons do not • Some operations are disabled for some discs. -
operate.
No subtitles are • Subtitles are not displayed for DVDs not containing subtitles. -
displayed. • Subtitles are turned off. Turn the subtitles setting on. 15
Audio (or subtitle)
• The audio (or subtitle) language does not switch for discs which do
-
language does not include multiple audio (or subtitle) languages.
not switch. • For some discs the audio (or subtitle) language cannot be switched -
when the operation to switch it is performed, but can be switched on
the menu screens.
Angle does not • The angle cannot be switched for DVDs which do not contain multiple -
switch. angles. In some cases multiple angles are only recorded for specific
scenes.
Playback does not • Check the "RATINGS" setting. 18
start when the
title is selected.
The password for
• Initialize using the procedure
described
at
" Resetting the 31
rating level has Microprocessor':
been forgotten.
Reset all the DVD
setting to Factory
Preset.
The disc is not
• The disc does not play with the selected audio or subtitle language if
-
played with the that audio or subtitle language is not included on that DVD.
audio or subtitle
language set
as the default
setting.
Picture is not • At the menu's "TV ASPECT" setting, select "4:3LB/4:3PS/WIDE
16
displayed in 4:3 (16:9)" and set according to the TV you are using.
(or 16:9).
Symptom Countenneasure
Page
Menu screen
• Check the default setting for the disc language's menu language.
15
messages for the
desired language
do not display.
[Audio]
Symptom Cause Countenneasure
Page
No sound is ·HDMI audio signal output • Set to "VIDEO SETUP" - "HDMI
16
output from
destination setting is wrong.
SETUP" - "HDMI AUDIO OUT"-
the monitor
"ON':
connected
with HDMI
connections.
[Tuner]
Symptom
Cause
Countenneasure
Page
Continuous noise
• Antenna cable is not properly • Connect the antenna cable 13
is heard when connected.
properly.
receiving FM • Connect an outdoor antenna.
programs
Hissing or
• This may be noise from a TV or • Turn off the TV
3
continuous noise interference from a radio station. • Change the position and direction
is heard when
of the AM loop antenna.
receiving AM
programs
38