The cutting range has now been set.
Click the [Size] tab.
Set the cutting range to match the loaded
material size.
For the width, click [ ] to select either 250 (9.84 in.)
or 340 mm (13.39 in.) (SV-15 only).
(* Set to 250 mm (9.84 in.) if you are using the
included test-use material.)
The width cannot be changed on the SV-12/8
models.
For the length, set a range that subtracts the mar-
gin from the loaded material length.
p 58 "Cutting Range"
Click [OK].
Click [OK] again to close the [Cutting Setup]
screen.
The white area is the cutting
range. Text or shapes drawn
outside this range are not cut.
Chapter 3: Performing Cutting
3-2 Cutting
31