Super Z Diesel Maintenance Schedule - HUSTLER ATZ Owner's Manual

Hustler high chair owner's manual
Hide thumbs Also See for Hustler ATZ:
Table of Contents

Advertisement

Super Z Diesel Maintenance Schedule

Refer to Fig. 4-18 & Fig. 4-19
SERVICE AT
INTERVALS INDICATED
Check coolant level
Verify safety start interlock system
Visually inspect unit for loose
hardware and/or damaged parts
Visually inspect tires
Check oil level, engine (1)
Check radiator coolant level
Check fuel level
Blades - sharpen & securely fastened
Discharge chute - securely in place &
in lowest position
Check air cleaner service indicator (5)
Clean engine and pump compartment
Visually inspect radiator core (8)
Grease deck idler
Grease deck pusher arms
Grease pump idler
Grease deck height pivots
Grease gauge wheel bearings
Change engine oil & filter (1) (4)
Check battery connections
Check tire pressure with a gauge
Check hydraulic oil level
Clean engine exterior (a)
Check pump and deck belt tension
& condition (6)
Check fuel and hydraulic lines (7)
Check fuel valve (7)
Tighten lug nuts on wheels (2)
Change fuel filter
Clean or replace hydraulic fill cap
Change hydraulic filter and oil (3)
Grease deck spindle housings
Clean radiator core (8)
Change radiator coolant
Check alternator belt
NOTES:
1.
Initial oil change is after 5 hours of operation. Thereafter,
change oil after every 100 hours operation. Change more
often under dusty or dirty conditions and during hot weather
periods.
2.
Torque initially and after first 2 hours of operation.
3.
Perform initial hydraulic oil and filter change after 50 hours
(one week) of operation. Then at 300 hours, then every 500
hours or annually. (Use only Mobil 1 15-50 synthetic oil)
4.
Change engine oil filter per the engine manufacturer's
recommendations. Refer to Engine Owner's Manual for
recommendations and other maintenance items.
5.
Service more often under dusty or dirty conditions. Use caution
when servicing to prevent dust contamination in the engine.
Do not clean filter element. Replace with a new one.
6.
Pump drive belt only - Inspect every 100 hours and replace
if worn or cracking is noticed. Otherwise, replace every 400
hours or 2 years whichever comes first.
7.
Check fuel line hoses and fuel valve for any cracks or leaks.
8.
More often under dusty or dirty conditions and during hot
weather.
REFERENCES:
a
— Refer to Engine Owner's Manual
NOTE: After completing maintenance cycle (500 hours), repeat cycle.
WEEKLY MONTHLY ANNUALLY OR
OR 50
OR 100
500
HOURS
HOURS
HOURS
Every 8 hours
Daily
Daily
Daily
Daily or every 4 hrs.
Daily
Daily
Daily
Daily
Daily
Daily
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Every 200 hours
26
600876_0706

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Super mini z 44Super mini z 52Super z dieselSuper z

Table of Contents