Hardware Contents; Preparation; Assembly Instructions; Caster Assembly - Nexgrill 720-0649 Manual

Figure 338
CSA International
Project 2075516
9 of 38

HARDWARE CONTENTS

Pack Description
AA 5/32-in. x 10-mm Truss Head Screw 26 pcs.
BB 5/32-in. Locking Washer
CC 1/4-in. x 15-mm Truss Head Screw
DD 1/4-in. Locking Washer
EE 5/32-in. x 15-mm Ladder Bolt
FF Lighting Rod
GG Battery / AAA
HH 1/4-in. Washer

PREPARATION

Before beginning assembly, make sure all parts are present. Compare parts with package contents list
and diagram above. If any part is missing or damaged, do not attempt to assemble, the product. Contact
customer service for replacement parts.
•
Estimated Assembly Time: 50 minutes
•
Tools Required for Assembly:
Phillips Screwdriver (not included) and Wrench (not included)
•
Note: The right and left sides of the grill are designated as if you are facing the front of the grill.

ASSEMBLY INSTRUCTIONS

1. Caster Assembly

Mount the casters onto the bottom panel (B) using sixteen
1/4-in. x 15-mm truss head screws (CC) and sixteen 1/4-in.
locking washers (DD).
The swivel caster with brake (K) should be positioned
under the left rear of the cart bottom and the swivel caster(J)
should be positioned under left front as shown in Fig. 1.
The two stationary casters (L) should be positioned under
the right side.
NOTE: Turn over the bottom panel for assembling casters.
2. Side Panel Assembly
Use three 1/4-in. x 15-mm truss head screws (CC)
and three 1/4-in. locking washers (DD) to connect
the bottom of the left side panel to the bottom panel
(B). Make the left side panel (F) flush with the rear
of bottom panel and tighten the screws.
Repeat for the right side panel (G).
Quantity
26 pcs.
47 pcs.
AA
47 pcs.
1 pc.
1 pc.
1 pc.
3 pcs.
FF
Phillips Screwsdriver
8
BB
CC DD
GG HH
J
L
Fig. 2
F
6 X
B
EE
Wrench
Fig. 1
K
B
16x
G