Operation With Dvd And Video Cd; Playing A Dvd And Video Cd; General Features; Moving To Another Title - LG DV1000 Owner's Manual

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD player.
Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
Press OPEN/CLOSE to open the disc tray.
1 1
Load your chosen disc in the tray, with the label
2 2
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Press OPEN/CLOSE to close the tray.
3 3
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
DVD
Use the 1 1 2 2 3 3 4 4 buttons to select the title/chapter
you want to view, then press SELECT/ENTER to start
playback.
Press TITLE or DISC MENU to return to the menu
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
19.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 20).
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
– If you want to watch a DVD during timer recording,
press TV/VCR on the remote control to select VCR
mode.
24

General Features

VCD2.0 VCD1.1
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup menu.

Moving to another TITLE

When a disc has more than one title, you can move to
another title as follows:

Moving to another CHAPTER/TRACK

DVD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3 3 /4 4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9).
For two-digit numbers, press the buttons in rapid
succession.

Slow Motion

1 Press . or > during pause.
The player will enter SLOW mode.
2 Use the . or > to select the required speed: t
1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16,
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
Slow motion playback in reverse is not applicable for
Video CD.
Note
1/3
Press DISPLAY when playback is stopped, then
press the appropriate numbered button (0-9) to
select a title number.
1/12 1/3
VCD1.1
Note
DVD VCD2.0
Note
DVD
VCD1.1