Icr And White Led Light - D-Link DCS-2136L User Manual

Section 4: Configuration
Here you can configure the white light LED settings. The settings on this
page will control how the light button on the live view page will appear.
It will also set up how the white light LED functions when used with event
triggers.
Light: The camera can enable or disable the white LED light
according to your preferences. This setting provides
additional controls depending on your selection. The options
are None, Pulse, Active, and Slider.
None: If the white light LED option is set to none, the camera PIR
sensor or any other external triggers will not activate the
white light LED.
Pulse: Select Pulse to activate the built-in light for a defined period
of time, for example 20 seconds. You can set how the white
light functions by selecting an action for when the white
light LED becomes active and goes inactive.
Active: Select Active to have the white light LED activated on a
predefined event, or by enabling via button on the live view
page. You can set how the white light functions by selecting
an action for when the white light LED becomes active and
goes inactive.
Slider: Selecting this option will enable a slider on the live view
page. The slider will allow you to control the brightness of
the built-in light, sliding it left to dim and sliding it right to
brighten.
Auto: Selecting this option will enable the white LED to
automatically come on when it senses a the surrounding
light levels have reached a certain threshold.
D-Link DCS-2136L User Manual
White LED Light
54