D-Link DCS-2136L User Manual page 13

Section 2: Installation
Optional: WPS Wireless Connection
Alternatively, if your router supports WPS, you can use the WPS
button on the camera to easily create a secure wireless connection
to your network.
To create a WPS connection:
Step 1
Press and hold the WPS button for approximately 5-6 seconds. The
blue WPS status LED above the button will blink.
Step 2
Within 60 seconds press the WPS button on your router. On some
routers, you may need to log in to the web interface and click on
an on-screen button to activate the WPS feature. If you are not sure
where the WPS button is on your router, please refer to your router's
User Manual.
The DCS-2136L will automatically create a wireless connection to
your router. While connecting, the status LED will flash. When the
connection process is complete, the status LED will turn solid.
Note: If your router does not support WPS, you can still use the wired
connection method on the previous page. After Zero Configuration
setup is complete, your router's wireless settings will be automatically
transferred to the camera.
D-Link DCS-2136L User Manual
WPS Button
13