Bryant 925SA Series Product Data

925SA
PREFERREDt SERIES SINGLE- - STAGE
4- -WAY MULTIPOISE
CONDENSING GAS FURNACE, SERIES A
The 925SA Multipoise SEER Boost Condensing Gas Furnace
features the single- -stage Preferred™ System. The Boost ECM
multiple- -speed blower motor is at the heart of the electrical
efficiency provided by this furnace.
Utilization Efficiency (AFUE) of 96.2%, the Preferred single- -stage
gas furnace provides added savings over standard gas furnaces.
This Preferred Gas Furnace features 4- -way multipoise installation
flexibility, and is available in six model sizes. The 925SA can be
vented for direct vent/two- -pipe, ventilated combustion air, or
single- -pipe applications. A Bryant Preferred Control and Preferred
Air Conditioner or Heat Pump, can be used to form a complete
Preferred Series System. All units meet California Air Quality
Management District emission requirements. All sizes are design
certified in Canada. All sizes are design certified for use in
Manufactured Housing (Mobile Home) applications when used
with factory- -approved MH accessory kit.
STANDARD FEATURES
S Quiet operation. Compare for yourself at HVACpartners.com.
S Most sizes meet ENERGY STARR Version 4.0 criteria for gas
furnaces: 95+ AFUE; AMACF electrical rating; 2% or less
cabinet airflow leakage. See table on Page 2.
S Ideal height 35" (889 mm) cabinet: short enough for taller coils,
but still allows enough room for service.
S Preferred Features—match with the Preferred Control for
Preferred System benefits.
Select Models
Product Data
A11264
With an Annual Fuel
Use of the AHRI Certified
manufacturer's participation in the program. For
verification of certification for individual products,
CERTIFIED
go to www.ahridirectory.org.
S Silicon Nitride Perfect Light™ Hot Surface Igniter.
S SmartEvap™ technology helps control humidity levels in the
home when used with a compatible humidity control system.
S Fan On Plus™ technology allows control of continuous fan
speed from a compatible thermostat.
S External Media Filter Cabinet included.
S 4- -way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow and optional through- -
the- -cabinet downflow venting capability.
S Boost ECM multiple- -speed blower motor, single- -speed inducer
motor, and single- -stage gas valve.
S Self- -diagnostics.
S Adjustable blower speed for cooling, continuous fan, and
dehumidification.
S Approved for Twinning applications with accessory kit (42060
through 66120 models, only).
S Approved for Manufactured Housing/Mobile Home applications
with MH accessory kit.
S Aluminized- -steel primary heat exchanger.
S Stainless- -steel condensing secondary heat exchanger.
S Propane convertible (See Accessory list).
S Factory- -configured ready for upflow applications.
S Fully- -insulated casing including blower section.
S Convenient Air Purifier and Humidifier connections.
S Direct- -vent/sealed combustion, single- -pipe venting or
ventilated combustion air.
S Installation flexibility: sidewall or vertical vent.
S Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1- -in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.

LIMITED WARRANTY*

S 10 year parts and lifetime heat exchanger limited warranty to the
original purchaser upon timely registration.
S Limited warranty period is five years for parts and twenty years
for the heat exchanger if not registered within 90 days of
installation.{
* For owner occupied, residential applications.
Jurisdictions where warranty benefits cannot be conditioned on registra-
{
tion will receive registered limited warranty benefits.
Mark indicates a
TM
1
Always Ask For