If You Have A Sony Dvd Player Or More Than One Sony Dvd Recorder; Changing Channels Of The Recorder Using The Remote - Sony RDR-HX750 Operating Instructions Manual

Code numbers of controllable TVs
Manufacturer
Sony
Hitachi
MGA/Mitsubishi
NEC
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Toshiba
The remote performs the following:
Buttons Operations
TV [/1 Turns your TV on or
off.
TV VOL Adjusts the volume
(volume) +/– of your TV.
TV CH +/– Selects the channel
on your TV.
TV INPUT (input Switches your TV's
select) input source.
Code number
01 (default)
02
If the supplied remote interferes with your
13
other Sony DVD recorder or player, set the
04
command mode number for this recorder and
the supplied remote to one that differs from
19
the other Sony DVD recorder or player after
21
you have completed "Step 6: Easy Setup."
16
The default command mode setting for this
recorder and the supplied remote is DVD3.
10
You can check the current Command Mode
20
in the front panel display. For details, see
page 114.
18
07
You can change channels of the recorder
using the number buttons.
Example: for channel 50
Press "5," "0," then press ENTER.
If you have a Sony DVD player
or more than one Sony DVD
recorder
The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
Changing channels of the
recorder using the remote
Number
buttons
ENTER
23