Canon EOS 30D Instruction Manual page 144

[!j Printing with Bubble Jet Direct
Start printing.
Turn the <
0>
dial to select [Print],
then press
<
§
>.
The printing will start.
During the printing, the
<
~
>
button
lamp will blink in blue.
When the printing ends, the screen
will return to step 1.
To stop the printing, press <§> while
[Stop] is displayed, then turn the
<
0
>
dial to select [OK] and press
<§>.
o
If [Bordered] is set, the date might be imprinted on the border, depending
on the printer.
[i]
If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
If you select [Stop] during the printing, the picture being printed will stop
printing and the paper will be discharged.
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select [Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
If you are using a BJprinter equipped with an operation display panel,
the error No. will be displayed if an error occurs. To resolve the
respective error, refer to the BJ printer's instruction manual.
144