Table of Contents
Advertisement
5.3
LAN
The LAN Port screen below allows you to specify a private IP address for your router's LAN interface.
Parameters
Description
LAN IP
Please input the IP address of this router.
Designate the Access Point's IP Address. This IP Address should be unique in
IP Address
your network. The default IP Address is 192.168.0.1.
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the Access
Subnet Mask
Point is fixed and the value is 255.255.255.0.
If it is enabled, this router will use the spanning tree protocol to prevent from
802.1d Spanning Tree
network loop happened in the LAN ports.
DHCP Server
Enable or disable the DHCP Server.
These settings are only available when 'DHCP Server' in 'LAN IP' section is
DHCP Server
'Enabled'
The DHCP Server will temporarily assign IP addresses to LAN clients. In the
Lease Time setting you can specify the time period that the DHCP Server lends
Lease Time
an IP address to your LAN client. The DHCP Server will change your LAN client's
IP address when this time threshold period is reached.
35
Advertisement
Table of Contents
