Cursor Movement Keys; Configuring The Kp-10; Version; Contrast Control - Comtech EF Data KP-10 Installation And Operation Manual

KP-10 External Keypad
Operation
2.3.4 C M
URSOR OVEMENT
Cursor keys, containing directional arrows, are located below and to the left of the
character keys. The cursor keys do not require use of the [SHIFT] key. Press the key to
move the display screen cursor in the direction indicated by the arrow on the key.
2.4 C
ONFIGURING THE
Access the default configuration settings using either of these two methods:
!
While pressing any key, supply power to the external keypad.
or
!
If power is already supplied, press [RESET] for a second.
The default configuration consists of several items:
!

Version

!
Contrast setting
!
Baud rate
!
Data format
!
Serial mode
These items appear in a series of displays, each one accessed by pressing and releasing a
key.
After the default configuration has been completed, the KP-10 is ready for input.
2.4.1 V
ERSION
After power-on, the Version (v1.1) appears on the display screen.
2.4.2 C
ONTRAST
Release the key pressed during power-on to display "CONTRAST" on the screen.
!
DARKER — Press [SCROLL UP] to darken the display screen contrast.
!
LIGHTER — Press [SCROLL DOWN] to lighten the display screen contrast.
Note: See Figure 5 for scroll key locations.
K
EYS
KP-10
C
ONTROL
13
Revision 1
MN/KP10.IOM