Setting Cruise Control - Pontiac G6 2009 Owner's Manual

Setting Cruise Control

{
CAUTION:
If you leave your cruise control on when you
are not using cruise, you might hit a button and go
into cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.
The cruise control buttons
are located on the steering
wheel.
J
(On/Off): Press this button to turn the cruise control
system on and off.
RES+ (Resume): Press this button to resume a set
speed and to accelerate the speed.
SET− (Set): Press this button to set a speed and to
decrease the speed.
[
(Cancel): Press this button to cancel cruise control.
To set a speed do the following:
1. Press the on/off symbol to turn cruise control on.
The indicator light on the button comes on.
2. Get to the speed you want.
3. Press the SET− symbol and release it. The cruise
symbol displays in the instrument panel cluster to
show the system is engaged.
4. Take your foot off the accelerator pedal.
When the brakes are applied, the cruise control
shuts off.
If the vehicle is in cruise control and the Traction Control
System (TCS) or Enhanced Traction System (ETS)
begins to limit wheel spin, the cruise control automatically
disengages. See Traction Control System (TCS) on
page 4-7. When road conditions allow, the cruise control
can be used again.
3-11