Specifications - Panasonic CQ-DPX172U Operating Instructions Manual

Specifications

❏ General
Power supply:
Current consumption:
Maximum power output:
Tone adjustment range:
Bass:
Treble:
Suitable speaker impedance:
Pre-Amp output voltage:
Output impedance:
Dimensions (W x H x D):
Weight:
❏ FM Stereo Radio
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity:
Frequency response:
Alternate channel selectivity:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
❏ AM Radio
Frequency range:
Usable sensitivity:
❏ CD Player
Sampling frequency:
DA converter:
Error correction system:
Pick-up type:
Light source:
Wave length:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter:
Channel separation:
MP3 decoding:
Bit rate:
Sampling frequency:
Above specifications comply with EIA standards.
Note: Specifications and the design are subject to modification without notice due to improvements in technology.
12 V DC (11 V – 16 V), test voltage 14.4 V, negative ground
Less than 2.2 A (CD play mode; 0.5 W x 4 channels)
45 W x 4 channels at 1 kHz, Volume control maximum
±12 dB at 100 Hz
±12 dB at 10 kHz
4 – 8 Ω
2.0 V (CD play mode; 1 kHz, 0 dB)
200 Ω
15 7
7" x 1 / " x 5 / " (178 x 50 x 150 mm)
16 8
3 lbs. 5 oz (1.5 kg)
87.9 MHz – 107.9 MHz
11.0 dBf. (1.25 µV, 75 Ω)
15.2 dBf. (1.6 µV, 75 Ω)
30 Hz – 15 kHz (±3 dB)
75 dB
42 dB (1 kHz)
75 dB
100 dB
70 dB
530 kHz – 1 710 kHz
28 dB/µV (25 µV, S/N 20 dB)
32 times oversampling
MASH • 1 bit/4 DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hz – 20 kHz (±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
MPEG 1 Audio Layer 3/MPEG 2 Audio Layer 3
(MPEG 1 Audio Layer 3) 32 kbps – 256 kbps, VBR (Variable Bit Rate)
(MPEG 2 Audio Layer 3) 16 kbps – 160 kbps, VBR (Variable Bit Rate)
(MPEG 1 Audio Layer 3) 32 kHz, 44.1 kHz, 48 kHz
(MPEG 2 Audio Layer 3) 22.05 kHz, 24 kHz
CQ-DPX172U
E
N
G
L
I
S
H
32
41