Maintenance And Servicing - Drill Master 67027 Set Up And Operating Instructions Manual

maintenance and
serVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
From accidental
operation:
turn the trigger of the tool to
its "oFF" position and
disconnect the tool from its
battery pack before
performing any inspection,
maintenance, or cleaning
procedures.
to preVent serious
injurY From tool
Failure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
lubrication
1. BeFore eacH use,
general condition of the tool. Check
for loose hardware, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
aFter use,
2.
to blow dust and debris out of vents.
Wipe external surfaces of the tool
with clean cloth.
SKU 67027
to preVent
serious injurY
inspect the
use compressed air
For technical questions, please call 1-800-444-3353. Page 10