Table of Contents
Advertisement
o There are holes on the base or the sides of the hob that you can
fix the four brackets to. There are three holes in each one of the
brackets.
o You should place the bracket on the underneath of the hob, in a
position that is appropriate for the aperture that you have cut
out.
Using the screws provided, fix the bracket to the hob.
These screws MUST be securely tightened.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
AS / NZS30002007 Regulations and in compliance
with the Manufacturer's instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 30 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o The spur outlet must still be accessible even when your hob is
located in its operating position.
o Cable type: H05 RRF 3 core x 6 mm²
22
Advertisement
Table of Contents
