Technical Data; Guide Values For Main Connection; The Hydraulic System Pressure - Husqvarna DXR-310 Operator's Manual

Guide values for mains connection
The power cable must be dimensioned by a qualifi ed person in accordance with national and local regulations. The
mains socket to which the machine is connected must be dimensioned for the same amperage as the machine's
electrical socket and extension cable, e.g. a 63 A electrical socket must be preceded by a 63 A fuse.
Nominal Min.
voltage from voltage
power source at machine
V V
400 380
400 380
400 380
460 440
460 440
460 440
* Two phases soft start. The directly related phase can be loaded up to 30% more.
The hydraulic system's pressure
Type of pressure
Pump pressure
The pressure in the pipes between pump and main stop
valve. The pressure varies between pressure at rest and
max. pressure depending on which hydraulic functions
are being used.
Pressure cut-off
Functions equipped with pressure cut-off can never be
run at a higher pressure than that indicated. The follow-
ing functions are equipped with pressure cut-off for the
respective pressure level.
Pressure at rest
The pressure that the pump delivers when no function is
activated and the pump around valves is shut.
50
- English

TECHNICAL DATA

Cable area Starting
current
2
mm A
6 90*
10 90*
16 90*
6 90*
10 90*
16 90*
Motor output
kW
22,0
22,0
22,0
25,3
25,3
25,3
Tool, max*
Rotating function
Outrigger down/up
Arm functions
Telescopic arm
(External hand tool - option)
Setting Max. cable
thermal over- length during
load relay operation
A m
44 163
44 272
44 435
44 163
44 272
44 435
Pressure, Bar
250
170
250/200
200
180
(140)
20 ±1