Connecting Equipment With Hdmi Terminals; Video Conversion Function - Denon AVR-5805 Operating Instructions Manual

NOTES:
• Video down conversion to the Main Zone's monitor output is only possible when the component video input resolution is 480i (interlaced
standard definition video – NTSC format, for North America) or 576i (interlaced standard definition video – PAL format, for Europe and
other countries).
• This video conversion function cannot be used with HDMI or DVI video signals.
• When not using the S-Video monitor output connector for the Main zone or Zone2, the composite video input signal is given priority and
up-converted to a component video signal. To convert with priority to the S-Video input signal, set the video convert mode to "S-Video".
To change the setting of the video conversion mode for the Main zone, see pages 72, 73.
To change the setting of the video conversion mode for the Zone2, see pages 93, 94.
• It is not possible to down-convert from the Zone2's component video signal to a S-Video or composite signal, so when not using the
Zone2's component monitor output connector, use an S-Video connection cord or composite connection cord to connect the AVR-5805
with the player.
Connecting equipment with HDMI (High-Definition Multimedia Interface) terminals
• A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High-Definition Multimedia Interface) connector
allows digital transfer of the digital images of DVD video and other sources, and the multi-channel sound of DVD audio and DVD video.
• The HDMI and DVI-D monitor output connectors on the AVR-5805 can only be used one at a time, not simultaneously.
• To provide audio output from AVR-5805's audio output connector, select "Amp" at the System Setup.
• To provide audio output from the TV, select "TV" at the System Setup. For details, see "Setting the HDMI/DVI In Assign". (See pages 75, 76)
DVD player
HDMI
OUT
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, the
cannot be controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the equipment that is
connected.
•
The on-screen display signals are not outputted from the HDMI MONITOR OUT.
Copyright Protection System
To play back the digital video and audio of DVD video and DVD audio through an HDMI/DVI-D connection, both the connected player
and monitor are required to support a copyright protection system called HDCP (High-bandwidth Digital Content Protection System).
HDCP is copy protection technology that comprises data encryption and authentication of the partner equipment. The AVR-5805 supports
HDCP. Please see the user's manual of your video display for more information about this.
14
Connecting a DVD player
HDMI IN terminals
• Connect the DVD player's HDMI output terminals to the HDMI IN terminal using HDMI cable.
Monitor equipped with
HDMI input connectors
HDMI IN
(HDCP)
HDMI cable
(commercially available)
Connecting a monitor TV
HDMI MONITOR OUT terminal
• Connect the TV's HDMI input terminals to the HDMI OUT terminal using HDMI
cable.
NOTE:
• The audio signals on the multi/stereo area of super audio CDs are not output.
For DVD Audio discs that are copyright-protected by CPPM, neither the video nor
audio signals are output.
AVR-5805