Setting Up The Tv With Your Pc - Samsung LN-T2353H Owner's Instructions Manual

Setting up the TV with your PC

How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
This function does not work in DVI-Digital mode.
1. Press the MENU button to display the menu.
Change to the PC mode first.
2.
Press the EXIT button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the frequency adjustments to the utmost and fine tune again.(See page 45) After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
1. Press the MENU button to display the menu.
Change to the PC mode first.
2. Press the ENTER button to select "Image Lock".
3.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
ENTER button.
ENTER button.
ENTER button.
ENTER button.
ENTER button.
ENTER button.
English - 46
TV Setup
More
Blue Screen : On
Melody : Off
PC
Home Theater PC : Off
Light Effect : Watching Mode On
Energy Saving : Off
Move Enter
TV PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter
Auto Adjustment in Progress.
Please Wait
TV PC
Image Lock
Position
Auto Adjustment
Image Reset
Move Enter
TV Image Lock
Coarse
Fine
Move Enter
Coarse
Return
Return
Return
50
0
Return
50