LG DP471T Owner's Manual page 16

Aspect Ratio – Selects the aspects ratio of the connected TV.
[4:3 PS]: Select this when connecting to a standard 4:3 screen TV and pre-
fer the wide picture on the entire screen cuts off the portions that do not fit.
[4:3 LB]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture with bands on the upper and lower portions of the
screen.
[16:9]: Select this when connecting to a wide-screen TV.
Adjust the time settings
Set the channel that broadcasts a clock signal and the clock will be set auto-
matically. If the clock that has automatically set is different with your local clock,
you can adjust time using [Time Offset] option (For example, when summer time
is started in local area.). Press B to select [Time Offset] option. Press v V to
select a value then press ENTER (Off, +/-30 min, +/-60 min, +/-90 min, +/-120
min). Select "Off" if the clock that has automatically set is identified with your
local clock.
Adjust the lock settings
To access the Change Pin, Channel Lock, Parental Guidance options, you must
enter the 4-digit password. If you have not yet entered a password you are
prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make
a mistake while entering number, press CLEAR to delete numbers.
If you forget your password, you can reset it. Display the SETUP menu. Input
ʻ210499ʼ and press ENTER. The password has now been cleared.
Change Pin – Changes the password.
Enter the new password twice after entering the current password.
Channel Lock –You can lock certain unsuitable channels to prevent children
from accessing them, use v V to select a channel you want to lock and then
press ENTER to lock the channel. If you want to watch a locked channel. You
should input the password.
Parental Guidance – Blocks TV programs that you or your family may not wish
to watch, based on the rating scheme set.
Select a rating then press ENTER.
[3 Years] - [18 Years]: Rating [3 Years] has the most restrictions and rating
[18 Years] is the least restrictive.
[Blocking Off]: Permits all programs.
16
Adjust the others settings
OTA (Over the Air) – Your unit is able to keep the built-in digital tuner up to
date with the latest software. The unit does it automatically at regular interval.
While the unit is in updating, there may have a disruption in reception for a few
hours. The reception should return to normal after the update is complete. This
unit must be plugged into AC power to receive updates. Do not unplug your unit
while an update is in progress.
[ON] : Updates the software when this unit is turned on.
[OFF] : Select this if you do not want to do not use this function.
Default Setting – You can reset the unit to its original factory settings. Press
ENTER while [Select] option is selected. Select [Yes] on the pop-up message to
return to the default setting.
Displaying the channel information
In DVB-T or DAB mode, press DISPLAY to display the information such as
channel number, station name and time displayed on-screen. If you press
DISPLAY twice, the signal strength and quality will appear on the screen.
Changing the Channel
Use CH - / + on the remote control to change the channel in memory to
select a channel directly.
Changing the Channel with Channel list
You can display channel list using the CH LIST button and switch into other
channel on the channel list.
In DVB-T or DAB mode, press CH LIST to display the channel list.
Select your desired channel using the v V and press ENTER to change another
channel.
You can switch the channel list to All or Favorite by pressing b B.