Adjusting A Feature - Jensen VM9424 Operating Instructions Manual

VM9424

Adjusting a Feature

1. Use the touchscreen or press the
control to highlight the audio feature to be adjusted.
2. Use the touchscreen or press the OK button (30) on the remote control to
view submenu choices.
3. Use the touchscreen or press the
control to highlight the audio feature to be adjusted.
4. Enter the option field for the feature you want to adjust by using the
touchscreen or pressing the OK button (30) on the remote control.
5. Select a new value by using the touchscreen or pressing the
6. Press OK to confirm.
General Sub-menu Features
Setting Options
Clock (HH:MM)
AM/PM AM
PM
Clock Mode 12Hr
24Hr
Beep Off
On
Camera Image Normal
Mirror
Bluetooth On
Off
Auto Dimmer On
Off
Start Volume Last
Adjust
Start Vol. 40-0
Adjust
Version View radio software version information.
/ buttons (26, 27) on the remote
/ buttons (26, 27) on the remote
Clock appears in the top right corner of the screen and
on the LCD screen during certain operations. NOTE:
The AM/PM indication will change as you continue to
adjust the hour past 12.
Set AM or PM when using 12Hr clock mode.
Clock displays 12 hour time using AM and PM.
Clock displays 24 hour time up to 23:59.
No beep sounds.
When turned on, an audible beep tone confirms each
function selection.
Reverse the camera image as if looking through a rear-
view mirror.
Connect the last active mobile phone by touching the
Pair icon when disconnected.
Automatically connect when your paired phone is in
range.
Select to automatically dim screen at dusk.
Set radio volume at turn-on to last volume level or
choose "adjust" to turn on at a pre-defined level.
Pre-defined automatic turn-on volume level.
15
/
Function
buttons.