Accessories; Torque Specifications - Husqvarna Z4219 Operator's Manual

Accessories

Head lights
BioClip attachment (Mulch clip)
Collection system

Torque Specifications

·Engine crankshaft bolt
·Deck pulley bolts
·Lug nuts
·Blade bolt
·Standard ¼" fasteners
·Standard 5/16" fasteners
·Standard 3/8" fasteners
·Standard 7/16" fasteners
·Standard ½" fasteners
When this product is worn out and no longer used, it shall be returned to the reseller or other party for
recycling.
In order to implement improvements, specifications and designs can be altered without prior
notification.
Note that no legal demands can be placed based on the information contained in these
instructions.
Use only original parts for repairs. The use of other parts voids the warranty.
Do not modify or install non-standard equipment to the unit without consent from the
manufacturer. Modifications to the unit may cause unsafe operation or damage the unit.
TECHNICAL DATA
50 ft/lb (67 Nm)
45 ft/lb (61 Nm)
75 ft/lb (100 Nm)
27-35 ft/lb (35-45 Nm)
9 ft/lb (12 Nm)
18 ft/lb (25 Nm)
33 ft/lb (44 Nm)
52 ft/lb (70 Nm)
80 ft/lb (110 Nm)
-65
English