Nikon Coolpix P330 Quick Start Manual page 117

Features That Can Be Set Using the d (Menu) Button (Shooting Mode)
Option
1
ISO sensitivity
Exposure
bracketing
1
AF area mode
Autofocus mode
Flash exp. comp.
Noise reduction
filter
Built-in ND filter
Active D-Lighting
Save user settings
Reset user settings
Zoom memory
66
Higher ISO sensitivity allows you to take pictures of darker
subjects. Additionally, even with subjects of similar
brightness, pictures can be taken at faster shutter speeds,
and blurring caused by camera shake and subject
movement can be reduced. When ISO sensitivity is set to
Auto (default setting), the camera sets the ISO sensitivity
automatically.
• In D (Manual) mode, ISO sensitivity is fixed at ISO 80 if
Auto or Fixed range auto is selected.
The exposure (brightness) can be changed automatically
during continuous shooting. The default setting is Off.
Set how the camera determines the focus area using the
autofocus to Face priority (A80), Auto, Manual,
Center (normal), Center (wide), Subject tracking or
Target finding AF (A79).
When Single AF (default setting) is selected, the camera
focuses only while the shutter-release button is pressed
halfway. When Full-time AF is selected, the camera
focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
Adjust the flash output. Use this option when the flash is
too bright or too dark. The default setting is 0.0.
Set the strength of the noise reduction function that is
normally performed when recording the picture. The
default setting is Normal.
Select On, Auto or Off (default setting) for the built-in ND
filter. Set this feature to On in conditions such as when
1
overexposure results from the subject being too bright, so
that the amount of light that enters the camera is reduced.
Prevent loss of contrast details in highlights and shadows
when shooting images. The default setting is Off.
The current settings are stored in mode dial i (A49).
The settings saved to mode dial i are reset.
If the zoom control is operated when set to On, the camera
changes in steps to the focal length (equivalent to 35mm
[135] format of angle of view) of the zoom lens that is set in
advance. The default setting is Off.
• Select On and press the k button to display the screen
for focal length selection. Press the k button to switch
the On [w]/Off setting, then press the multi selector K
to apply the selection.
Description
A
E41
E42
E43
E47
E48
E48
E49
E50
49
50
E51